• DY6 returns valuable heavy rare earths dysprosium, terbium plus niobium in drilling at Machinga project in Malawi
  • The elements are critical to high temperature magnets used in EV motors
  • Phase two drilling is scheduled to commence in the December quarter

 

Assays from drilling at DY6 Metals’ Machinga Main Northern anomaly, part of the flagship Machinga project in southern Malawi, have confirmed the zone is enriched with the valuable heavy rare earths dysprosium and terbium as well as niobium.

Machinga is just 40km east-southeast of Lindian Resources’ 261Mt at 2.19% TREO Kangankunde project, described as one of biggest and best rare earths projects outside China.

It’s one of four world-class projects Argonaut senior metals and mining analyst George Ross says are well-placed ride the cycles.

A great spot for DY6 Metals’ (ASX:DY6) flagship project then, which is particularly enriched with high-value heavy rare earth elements dysprosium and terbium – and holds significant niobium and tantalum potential as well.

DY6’s maiden 35-hole, 3,643m RC drill program was designed to follow up on historical drilling in 2010 which returned a highlight 11m at 1% TREO (including 330ppm dysprosium) from a down-hole depth of 12m and 5m at 1.5% TREO from 26m.

Notable assays from the first 11 holes at the northern end of the Machinga Main anomaly – just one of six targets identified to date – include 7m at 1.42% total rare earth oxide (TREO) with 0.49% Nb2O5 and 16m at 0.54% TREO with 0.21% Nb2O5.

The mineralisation also contains an average  DyTb:TREO ratio of 3.5% in samples greater than 2500ppm TREO and niobium grades of 0.28% Nb2O5 at a cutoff grade of 2500 ppm TREO and 0.64% Nb2O5 for samples at TREO grades greater than 1%.

“The initial results are showing the prospect is skewed towards abundant heavy rare earths critical to high temperature magnets used in EV traction motors,” DY6 CEO Lloyd Kaiser said.

Importantly, it looks like the mineralised zones are thickening at depth.

 

DY6 Metals ASX DY6
RC drill hole cross section at Machinga Main North Anomaly. Pic via DY6

 

Widespread rare earth intersections

“The phase one program, comprising 35 RC holes, forms part of a substantial, project-wide exploration campaign at Machinga and the surrounding anomaly zones,” Kaiser said.

“We remain enthusiastic about the future for the Machinga project as we continue developing this exciting HREE and Nb opportunity.”

 

DY6 Metals ASX DY6
Machinga Project location in Southern Malawi. Pic via DY6.

 

Phase two drilling in December quarter

Results for the remaining 24 RC holes from Machinga Main Northern Zone are expected to be released progressively during October and the first batch of assays from eight diamond holes drilled (900m) are expected in the December quarter.

“Phase two drilling is expected to begin before the end of the year once all assays from the phase one program have been received and processed,” Kaiser said.

“On-ground exploration will continue to focus on the geophysical targets and in particular, those areas north and south of the Machinga Main prospect.

“We look forward to continuing to update the market as our exploration progresses.”

 

DY6 Metals ASX DY6
Drill collar locations at Machinga north prospect – first 11 RC hole collar locations in red. Pic via DY6

 

 

This article was developed in collaboration with DY6 Metals, a Stockhead advertiser at the time of publishing.

 

This article does not constitute financial product advice. You should consider obtaining independent advice before making any financial decisions.